4a23ef004a
* feat(tailscale): add common flags as fields * Update charts/stable/tailscale/templates/_configmap.tpl Signed-off-by: Stavros Kois <47820033+stavros-k@users.noreply.github.com> * Update charts/stable/tailscale/docs/How-To-Guide.md Signed-off-by: Stavros Kois <47820033+stavros-k@users.noreply.github.com> * change to ClusterIP * set hostnetwork * remove service altogether Signed-off-by: Stavros Kois <47820033+stavros-k@users.noreply.github.com>
100 lines
3.2 KiB
Markdown
100 lines
3.2 KiB
Markdown
# How-To
|
|
|
|
This is a quick how-to or setup-guide to use Tailscale using on your TrueNAS box.
|
|
This can be applied to other systems but this specific guide is SCALE specific with the prerequisites.
|
|
|
|
## Requirements
|
|
|
|
- Tailscale Account (Free accounts available at [Tailscale's Official website](https://www.tailscale.com))
|
|
- Tailscale Truecharts Chart
|
|
|
|
## Prerequisites (LAN access only)
|
|
|
|
For proper access to your local network (LAN), this chart requires two `sysctl` values set on your TrueNAS or system.
|
|
For TrueNAS SCALE the way to change these values are inside `System Settings` then `Advanced`.
|
|
On that screen you add the following two values:
|
|
|
|
- `net.ipv4.ip_forward`
|
|
- `net.ipv4.conf.all.src_valid_mark`
|
|
|
|
Set them to `1` and `Enabled`
|
|
|
|
|
|
|
|
Also prepare your Tailscale Auth Key for your setup, easy to generate on the page below
|
|
|
|
|
|
|
|
## Tailscale Chart Setup
|
|
|
|
### Application name
|
|
|
|
Ideally use `tailscale` but you can use any name here.
|
|
|
|
### Controller
|
|
|
|
Leave defaults here.
|
|
|
|
### Container Configuration
|
|
|
|
- `Auth Key`: The key you received from tailscale in prerequisites above
|
|
- `Userspace`: Keep checked (default) unless you wish to create your own tunnels.
|
|
- `Accept DNS`: Enabling it will pass your Global Nameservers from Tailscale to your local install.
|
|
- `Routes`: Change to the routes you wish Tailscale to have access to on the devices it's connected, such as my LAN in the example.
|
|
- `Extra Args` passes arguments/flags to the `tailscale up` command.
|
|
- `Hostname` You can specify a specific hostname for use inside Tailscale (see image below). (Passes `--hostname HOSTNAME` to `Extra args`)
|
|
- `Advertise as exit node` This is used to pass traffic through tailscale like a private VPN. (Passes `--advertise-exit-node` to `Extra args`)
|
|
|
|
For more Extra Args and their usage please check the [Tailscale Knowledge Base](https://tailscale.com/kb/1080/cli/#up)
|
|
since we consider these advanced features and these may/not be compatible with everyone's exact setup.
|
|
|
|
TODO: Update image with the new fields
|
|
|
|
|
|
**Hostname example**
|
|
|
|
|
|
|
|
### Networking and Services
|
|
|
|
The default ports are fine for this chart, you shouldn't need to port forward or open ports on your router.
|
|
|
|
:::caution
|
|
|
|
In case you want to access their SMB shares or TrueNAS GUI via Tailscale.
|
|
You will have to ensure that `Host Networking` is enabled and `Userspace` is disabled.
|
|
|
|
:::
|
|
|
|
|
|
|
|
### Storage and Persistence
|
|
|
|
Highly recommended to leave it as `PVC (Simple)`
|
|
|
|
### Ingress
|
|
|
|
Shouldn't need to enable this.
|
|
|
|
### Security and Permissions
|
|
|
|
Should be left as is, unless you know what you are doing!
|
|
|
|
### Resources and Devices
|
|
|
|
You can set custom resources for CPU/RAM, but defaults should be work fine in most cases
|
|
Defaults are 4 vCores and 8G RAM.
|
|
|
|
### Addons
|
|
|
|
Shouldn't need to enable any.
|
|
|
|
## Support
|
|
|
|
- You can also reach us using [Discord](https://discord.gg/tVsPTHWTtr) for real-time feedback and support
|
|
- If you found a bug in our chart, open a Github [issue](https://github.com/truecharts/apps/issues/new/choose)
|
|
|
|
---
|
|
|
|
All Rights Reserved - The TrueCharts Project
|