* fix(appdaemon) valid_chars for long | lat + port
* revert port and increase valid_chars for long/lat
* rofs false
* update validation.md
* md
Co-authored-by: Stavros Kois <47820033+stavros-k@users.noreply.github.com>
* fix(home-assistant) fix home-assistant subnet
* use a better way for trusted proxies
* replace else with a dynamic list instead of hardcoded
Co-authored-by: Stavros Kois <47820033+stavros-k@users.noreply.github.com>
* SMTP username and password not required for support SMTP relays
I have changed the requiredness of the SMTP settings password and username field, to not required. This is necessary to support SMTP relays without authentication. (Like the Exchange Online one I’am using with ip verification)
Signed-off-by: StanMar-bit <84271654+StanMar-bit@users.noreply.github.com>
* adjust templates to handle smtp without user/pass
Signed-off-by: StanMar-bit <84271654+StanMar-bit@users.noreply.github.com>
Co-authored-by: Stavros Kois <47820033+stavros-k@users.noreply.github.com>
* feat(lama-cleaner) add lama-cleaner
* add icon
* add extraArgs
* add extraArgs
* add host command
* set as command
* args
* no point to test gpu on CI
Co-authored-by: Stavros kois <s.kois@outlook.com>
* Fix printf error
Fix printf complaining it can't print a float as a string.
Fixed a small typo in the validate label.
* bump
Co-authored-by: Stavros kois <s.kois@outlook.com>
@@ -32,13 +32,13 @@ All our charts are supposed to work together, be easy to setup using the TrueNAS
Installing TrueCharts within TrueNAS SCALE, is possible using the TrueNAS SCALE Catalog list.
Check TrueCharts [Quick-Start Guides](https://truecharts.org/docs/manual/SCALE%20Apps/Adding-TrueCharts) for more information.
Check TrueCharts [Quick-Start Guides](https://truecharts.org/manual/guides/Adding-TrueCharts) for more information.
### Support
Please check our [FAQ](https://truecharts.org/docs/about/intro), [manual](https://truecharts.org/docs/manual/SUPPORT/) and [Issue tracker](https://github.com/truecharts/charts/issues) There is a significant chance your issue has been reported before!
Please check our [FAQ](https://truecharts.org/manual/FAQ), [manual](https://truecharts.org/manual/intro/) and [Issue tracker](https://github.com/truecharts/charts/issues) There is a significant chance your issue has been reported before!
Still something not working as expected? [Contact us!](https://truecharts.org/docs/about/contact/) and we'll figure it out together!
Still something not working as expected? [Contact us!](https://discord.gg/tVsPTHWTtr) and we'll figure it out together!
### Roadmap
@@ -124,7 +124,7 @@ A lot of our work is based on the great effort of others. We would love to exten
## Contributors ✨
<!-- ALL-CONTRIBUTORS-BADGE:START - Do not remove or modify this section -->
echo"This App is supplied by TrueCharts, for more information visit the manual: [https://truecharts.org/docs/charts/${train}/${chartname}](https://truecharts.org/docs/charts/${train}/${chartname})" >> ${target}/app-readme.md
echo"This App is supplied by TrueCharts, for more information visit the manual: [https://truecharts.org/charts/${train}/${chartname}](https://truecharts.org/charts/${train}/${chartname})" >> ${target}/app-readme.md
echo"" >> ${target}/app-readme.md
echo"---" >> ${target}/app-readme.md
echo"" >> ${target}/app-readme.md
echo"TrueCharts can only exist due to the incredible effort of our staff." >> ${target}/app-readme.md
echo"Please consider making a [donation](https://truecharts.org/docs/about/sponsor) or contributing back to the project any way you can!" >> ${target}/app-readme.md
echo"Please consider making a [donation](https://truecharts.org/about/sponsor) or contributing back to the project any way you can!" >> ${target}/app-readme.md
ClickHouse is a column-oriented database management system (DBMS) for online analytical processing of queries (OLAP).
## General Info
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
However only installations using the TrueNAS SCALE Apps system are supported.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [clickhouse](https://truecharts.org/docs/charts/dependency/clickhouse)
For more information about this App, please check the docs on the TrueCharts [website](https://truecharts.org/charts/dependency/)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `clickhouse` deployment
```console
helm uninstall clickhouse
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install clickhouse \
--set env.TZ="America/New York" \
TrueCharts/clickhouse
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/manual/SCALE%20Apps/Important-MUST-READ).
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
However only installations using the TrueNAS SCALE Apps system are supported.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [collabora-online](https://truecharts.org/docs/charts/dependency/collabora-online)
For more information about this App, please check the docs on the TrueCharts [website](https://truecharts.org/charts/dependency/)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `collabora-online` deployment
```console
helm uninstall collabora-online
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install collabora-online \
--set env.TZ="America/New York" \
TrueCharts/collabora-online
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/manual/SCALE%20Apps/Important-MUST-READ).
Fast, reliable, scalable, and easy to use open-source relational database system.
## General Info
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
However only installations using the TrueNAS SCALE Apps system are supported.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [mariadb](https://truecharts.org/docs/charts/dependency/mariadb)
For more information about this App, please check the docs on the TrueCharts [website](https://truecharts.org/charts/dependency/)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `mariadb` deployment
```console
helm uninstall mariadb
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install mariadb \
--set env.TZ="America/New York" \
TrueCharts/mariadb
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/manual/SCALE%20Apps/Important-MUST-READ).
Memcached is a memory-backed database caching solution
## General Info
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
However only installations using the TrueNAS SCALE Apps system are supported.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [memcached](https://truecharts.org/docs/charts/dependency/memcached)
For more information about this App, please check the docs on the TrueCharts [website](https://truecharts.org/charts/dependency/)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `memcached` deployment
```console
helm uninstall memcached
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install memcached \
--set env.TZ="America/New York" \
TrueCharts/memcached
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/manual/SCALE%20Apps/Important-MUST-READ).
Fast, reliable, scalable, and easy to use open-source no-sql database system.
## General Info
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
However only installations using the TrueNAS SCALE Apps system are supported.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [mongodb](https://truecharts.org/docs/charts/dependency/mongodb)
For more information about this App, please check the docs on the TrueCharts [website](https://truecharts.org/charts/dependency/)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `mongodb` deployment
```console
helm uninstall mongodb
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install mongodb \
--set env.TZ="America/New York" \
TrueCharts/mongodb
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/manual/SCALE%20Apps/Important-MUST-READ).
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
However only installations using the TrueNAS SCALE Apps system are supported.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [postgresql](https://truecharts.org/docs/charts/dependency/postgresql)
For more information about this App, please check the docs on the TrueCharts [website](https://truecharts.org/charts/dependency/)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `postgresql` deployment
```console
helm uninstall postgresql
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install postgresql \
--set env.TZ="America/New York" \
TrueCharts/postgresql
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/manual/SCALE%20Apps/Important-MUST-READ).
Promtail is an agent which ships the contents of local logs to a Loki instance
## General Info
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
However only installations using the TrueNAS SCALE Apps system are supported.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [promtail](https://truecharts.org/docs/charts/dependency/promtail)
For more information about this App, please check the docs on the TrueCharts [website](https://truecharts.org/charts/dependency/)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `promtail` deployment
```console
helm uninstall promtail
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install promtail \
--set env.TZ="America/New York" \
TrueCharts/promtail
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/manual/SCALE%20Apps/Important-MUST-READ).
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
However only installations using the TrueNAS SCALE Apps system are supported.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [redis](https://truecharts.org/docs/charts/dependency/redis)
For more information about this App, please check the docs on the TrueCharts [website](https://truecharts.org/charts/dependency/)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `redis` deployment
```console
helm uninstall redis
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install redis \
--set env.TZ="America/New York" \
TrueCharts/redis
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/manual/SCALE%20Apps/Important-MUST-READ).
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
However only installations using the TrueNAS SCALE Apps system are supported.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [solr](https://truecharts.org/docs/charts/dependency/solr)
For more information about this App, please check the docs on the TrueCharts [website](https://truecharts.org/charts/dependency/)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `solr` deployment
```console
helm uninstall solr
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install solr \
--set env.TZ="America/New York" \
TrueCharts/solr
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
```console
helm install solr TrueCharts/solr -f values.yaml
```
#### Connecting to other charts
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/manual/SCALE%20Apps/Important-MUST-READ).
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
However only installations using the TrueNAS SCALE Apps system are supported.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [subchart](https://truecharts.org/docs/charts/dependency/subchart)
For more information about this App, please check the docs on the TrueCharts [website](https://truecharts.org/charts/dependency/)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `subchart` deployment
```console
helm uninstall subchart
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install subchart \
--set env.TZ="America/New York" \
TrueCharts/subchart
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/manual/SCALE%20Apps/Important-MUST-READ).
Blocky is a DNS proxy, DNS enhancer and ad-blocker for the local network written in Go
## General Info
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
However only installations using the TrueNAS SCALE Apps system are supported.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [blocky](https://truecharts.org/docs/charts/enterprise/blocky)
For more information about this App, please check the docs on the TrueCharts [website](https://truecharts.org/charts/enterprise/)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `blocky` deployment
```console
helm uninstall blocky
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install blocky \
--set env.TZ="America/New York" \
TrueCharts/blocky
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/manual/SCALE%20Apps/Important-MUST-READ).
A network load-balancer implementation for Kubernetes using standard routing protocols
## General Info
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
However only installations using the TrueNAS SCALE Apps system are supported.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [metallb](https://truecharts.org/docs/charts/enterprise/metallb)
For more information about this App, please check the docs on the TrueCharts [website](https://truecharts.org/charts/enterprise/)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `metallb` deployment
```console
helm uninstall metallb
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install metallb \
--set env.TZ="America/New York" \
TrueCharts/metallb
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/manual/SCALE%20Apps/Important-MUST-READ).
Unofficial Bitwarden compatible server written in Rust
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [vaultwarden](https://truecharts.org/docs/charts/stable/vaultwarden)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `vaultwarden` deployment
```console
helm uninstall vaultwarden
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install vaultwarden \
--set env.TZ="America/New York" \
TrueCharts/vaultwarden
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
{{-ifand(eq.Values.vaultwarden.verifySignuptrue)(eq.Values.vaultwarden.smtp.enabledfalse)}}{{required"Signup verification requires SMTP to be enabled"nil}}{{end}}
{{-ifand(eq.Values.vaultwarden.requireEmailtrue)(eq.Values.vaultwarden.smtp.enabledfalse)}}{{required"Requiring emails for login depends on SMTP"nil}}{{end}}
DOMAIN:"https://{{ if .Values.ingress }}{{ if .Values.ingress.main.enabled }}{{ ( index .Values.ingress.main.hosts 0 ).host }}{{ else }}placeholder.com{{ end }}{{ else }}placeholder.com{{ end }}"
DATABASE_URL:
secretKeyRef:
name:cnpgcreds
key:std
envFrom:
- configMapRef:
name:vaultwardenconfig
- secretRef:
name:vaultwardensecret
database:
# -- Database type,
# must be one of: 'sqlite', 'mysql' or 'postgresql'.
type:postgresql
# -- Enable DB Write-Ahead-Log for SQLite,
# disabled for other databases. https://github.com/dani-garcia/bitwarden_rs/wiki/Running-without-WAL-enabled
wal:true
## URL for external databases (mysql://user:pass@host:port or postgresql://user:pass@host:port).
# url: ""
## Set the size of the database connection pool.
# maxConnections: 10
## Connection retries during startup, 0 for infinite. 1 second between retries.
## Whitelist domains allowed to sign-up. 'allowSignups' is ignored if set.
# signupDomains:
# - domain.tld
# -- Verify e-mail before login is enabled.
# SMTP must be enabled.
verifySignup:false
# When a user logs in an email is required to be sent. If sending the email fails the login attempt will fail. SMTP must be enabled.
requireEmail:false
## Maximum attempts before an email token is reset and a new email will need to be sent.
# emailAttempts: 3
## Email token validity in seconds.
# emailTokenExpiration: 600
# Allow invited users to sign-up even feature is disabled: https://github.com/dani-garcia/bitwarden_rs/wiki/Disable-invitations
allowInvitation:true
# Show password hints: https://github.com/dani-garcia/bitwarden_rs/wiki/Password-hint-display
## Default organization name in invitation e-mails that are not coming from a specific organization.
# defaultInviteName: ""
showPasswordHint:true
# Enable Websockets for notification. https://github.com/dani-garcia/bitwarden_rs/wiki/Enabling-WebSocket-notifications
# Redirect HTTP path "/notifications/hub" to port 3012. Ingress/IngressRoute controllers are automatically configured.
enableWebsockets:true
# Enable Web Vault (static content). https://github.com/dani-garcia/bitwarden_rs/wiki/Disabling-or-overriding-the-Vault-interface-hosting
enableWebVault:true
# Restrict creation of orgs. Options are: 'all', 'none' or a comma-separated list of users.
orgCreationUsers:all
## Limit attachment disk usage per organization.
# attachmentLimitOrg:
## Limit attachment disk usage per user.
# attachmentLimitUser:
## HaveIBeenPwned API Key. Can be purchased at https://haveibeenpwned.com/API/Key.
# hibpApiKey:
admin:
# Enable admin portal.
enabled:false
# Disabling the admin token will make the admin portal accessible to anyone, use carefully: https://github.com/dani-garcia/bitwarden_rs/wiki/Disable-admin-token
disableAdminToken:false
## Token for admin login, will be generated if not defined. https://github.com/dani-garcia/bitwarden_rs/wiki/Enabling-admin-page
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
However only installations using the TrueNAS SCALE Apps system are supported.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [acestream](https://truecharts.org/docs/charts/incubator/acestream)
For more information about this App, please check the docs on the TrueCharts [website](https://truecharts.org/charts/incubator/)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `acestream` deployment
```console
helm uninstall acestream
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install acestream \
--set env.TZ="America/New York" \
TrueCharts/acestream
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/manual/SCALE%20Apps/Important-MUST-READ).
Adguardhome-sync(https://github.com/bakito/adguardhome-sync/) is a tool to synchronize AdGuardHome config to replica instances.
## General Info
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
However only installations using the TrueNAS SCALE Apps system are supported.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [adguardhome-sync](https://truecharts.org/docs/charts/incubator/adguardhome-sync)
For more information about this App, please check the docs on the TrueCharts [website](https://truecharts.org/charts/incubator/)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `adguardhome-sync` deployment
```console
helm uninstall adguardhome-sync
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install adguardhome-sync \
--set env.TZ="America/New York" \
TrueCharts/adguardhome-sync
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/manual/SCALE%20Apps/Important-MUST-READ).
This Chart will download and install SteamCMD. It will also install Alien Swarm: Reactive Drop and run it.
## General Info
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
However only installations using the TrueNAS SCALE Apps system are supported.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [alienswarm-reactivedrop](https://truecharts.org/docs/charts/incubator/alienswarm-reactivedrop)
For more information about this App, please check the docs on the TrueCharts [website](https://truecharts.org/charts/incubator/)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `alienswarm-reactivedrop` deployment
```console
helm uninstall alienswarm-reactivedrop
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install alienswarm-reactivedrop \
--set env.TZ="America/New York" \
TrueCharts/alienswarm-reactivedrop
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/manual/SCALE%20Apps/Important-MUST-READ).
This Chart will download and install SteamCMD. It will also install Alien Swarm and run it.
## General Info
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
However only installations using the TrueNAS SCALE Apps system are supported.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [alienswarm](https://truecharts.org/docs/charts/incubator/alienswarm)
For more information about this App, please check the docs on the TrueCharts [website](https://truecharts.org/charts/incubator/)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `alienswarm` deployment
```console
helm uninstall alienswarm
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install alienswarm \
--set env.TZ="America/New York" \
TrueCharts/alienswarm
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/manual/SCALE%20Apps/Important-MUST-READ).
This Chart will download and install SteamCMD. It will also install America's Army: Proving Grounds and run it.
## General Info
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
However only installations using the TrueNAS SCALE Apps system are supported.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [americasarmy-pg](https://truecharts.org/docs/charts/incubator/americasarmy-pg)
For more information about this App, please check the docs on the TrueCharts [website](https://truecharts.org/charts/incubator/)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `americasarmy-pg` deployment
```console
helm uninstall americasarmy-pg
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install americasarmy-pg \
--set env.TZ="America/New York" \
TrueCharts/americasarmy-pg
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/manual/SCALE%20Apps/Important-MUST-READ).
description:"Automated Movie Trailer Downloader :: AMTD is a Radarr Companion script to automatically download movie trailers for use in media applications\n"
Automated Movie Trailer Downloader :: AMTD is a Radarr Companion script to automatically download movie trailers for use in media applications
## General Info
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
However only installations using the TrueNAS SCALE Apps system are supported.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [amtd](https://truecharts.org/docs/charts/incubator/amtd)
For more information about this App, please check the docs on the TrueCharts [website](https://truecharts.org/charts/incubator/)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `amtd` deployment
```console
helm uninstall amtd
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install amtd \
--set env.TZ="America/New York" \
TrueCharts/amtd
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
```console
helm install amtd TrueCharts/amtd -f values.yaml
```
#### Connecting to other charts
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/manual/SCALE%20Apps/Important-MUST-READ).
description:"Automated Music Video Downloader :: AMVD is a Lidarr Companion script to automatically download and tag Music Videos for use in various media applications"
Automated Music Video Downloader :: AMVD is a Lidarr Companion script to automatically download and tag Music Videos for use in various media applications
## General Info
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
However only installations using the TrueNAS SCALE Apps system are supported.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [amvd](https://truecharts.org/docs/charts/incubator/amvd)
For more information about this App, please check the docs on the TrueCharts [website](https://truecharts.org/charts/incubator/)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `amvd` deployment
```console
helm uninstall amvd
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install amvd \
--set env.TZ="America/New York" \
TrueCharts/amvd
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
```console
helm install amvd TrueCharts/amvd -f values.yaml
```
#### Connecting to other charts
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/manual/SCALE%20Apps/Important-MUST-READ).
description:Android in Chart solution with noVNC supported and video recording. Work way better with Intel CPUs because AMD doesn't an cpu graphics card. So with amd cpus can be unusable.
Android in Chart solution with noVNC supported and video recording. Work way better with Intel CPUs because AMD doesn't an cpu graphics card. So with amd cpus can be unusable.
## General Info
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
However only installations using the TrueNAS SCALE Apps system are supported.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [android-8-0](https://truecharts.org/docs/charts/incubator/android-8-0)
For more information about this App, please check the docs on the TrueCharts [website](https://truecharts.org/charts/incubator/)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `android-8-0` deployment
```console
helm uninstall android-8-0
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install android-8-0 \
--set env.TZ="America/New York" \
TrueCharts/android-8-0
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/manual/SCALE%20Apps/Important-MUST-READ).
Control AndroidTV/FireTV devices through ADB from the Home Assistant Core Chart.
## General Info
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
However only installations using the TrueNAS SCALE Apps system are supported.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [androiddebugbridge](https://truecharts.org/docs/charts/incubator/androiddebugbridge)
For more information about this App, please check the docs on the TrueCharts [website](https://truecharts.org/charts/incubator/)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `androiddebugbridge` deployment
```console
helm uninstall androiddebugbridge
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install androiddebugbridge \
--set env.TZ="America/New York" \
TrueCharts/androiddebugbridge
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/manual/SCALE%20Apps/Important-MUST-READ).
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
However only installations using the TrueNAS SCALE Apps system are supported.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [anki-sync-server](https://truecharts.org/docs/charts/incubator/anki-sync-server)
For more information about this App, please check the docs on the TrueCharts [website](https://truecharts.org/charts/incubator/)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `anki-sync-server` deployment
```console
helm uninstall anki-sync-server
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install anki-sync-server \
--set env.TZ="America/New York" \
TrueCharts/anki-sync-server
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/manual/SCALE%20Apps/Important-MUST-READ).
Anope is a set of IRC Services designed for flexibility and ease of use.
## General Info
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
However only installations using the TrueNAS SCALE Apps system are supported.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [anope](https://truecharts.org/docs/charts/incubator/anope)
For more information about this App, please check the docs on the TrueCharts [website](https://truecharts.org/charts/incubator/)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `anope` deployment
```console
helm uninstall anope
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install anope \
--set env.TZ="America/New York" \
TrueCharts/anope
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/manual/SCALE%20Apps/Important-MUST-READ).
description:"Very simple WebDAV server based on Apache. You need a WebDAV client to transfer files. It does not include a WebUI to upload files through your browser."
Very simple WebDAV server based on Apache. You need a WebDAV client to transfer files. It does not include a WebUI to upload files through your browser.
## General Info
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
However only installations using the TrueNAS SCALE Apps system are supported.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [apache-webdav](https://truecharts.org/docs/charts/incubator/apache-webdav)
For more information about this App, please check the docs on the TrueCharts [website](https://truecharts.org/charts/incubator/)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `apache-webdav` deployment
```console
helm uninstall apache-webdav
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install apache-webdav \
--set env.TZ="America/New York" \
TrueCharts/apache-webdav
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/manual/SCALE%20Apps/Important-MUST-READ).
description:"Apprise-api(https://github.com/caronc/apprise-api) Takes advantage of Apprise(https://github.com/caronc/apprise) through your network with a user-friendly API.\n"
Apprise-api(https://github.com/caronc/apprise-api) Takes advantage of Apprise(https://github.com/caronc/apprise) through your network with a user-friendly API.
## General Info
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
However only installations using the TrueNAS SCALE Apps system are supported.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [apprise-api](https://truecharts.org/docs/charts/incubator/apprise-api)
For more information about this App, please check the docs on the TrueCharts [website](https://truecharts.org/charts/incubator/)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `apprise-api` deployment
```console
helm uninstall apprise-api
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install apprise-api \
--set env.TZ="America/New York" \
TrueCharts/apprise-api
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/manual/SCALE%20Apps/Important-MUST-READ).
description:Turn any datasource into an internal app in minutes. Appsmith lets you drag-and-drop UI components to build pages, connect to any API, database or GraphQL source and write logic with JavaScript objects.
Turn any datasource into an internal app in minutes. Appsmith lets you drag-and-drop UI components to build pages, connect to any API, database or GraphQL source and write logic with JavaScript objects.
## General Info
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
However only installations using the TrueNAS SCALE Apps system are supported.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [appsmith](https://truecharts.org/docs/charts/incubator/appsmith)
For more information about this App, please check the docs on the TrueCharts [website](https://truecharts.org/charts/incubator/)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `appsmith` deployment
```console
helm uninstall appsmith
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install appsmith \
--set env.TZ="America/New York" \
TrueCharts/appsmith
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/manual/SCALE%20Apps/Important-MUST-READ).
description:"The Archive Team Warrior is a virtual archiving appliance. You can run it to help with the Archive Team archiving efforts. It will download sites and upload them to our archive—and it’s really easy to do!"
The Archive Team Warrior is a virtual archiving appliance. You can run it to help with the Archive Team archiving efforts. It will download sites and upload them to our archive—and it’s really easy to do!
## General Info
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
However only installations using the TrueNAS SCALE Apps system are supported.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [archiveteam-warrior](https://truecharts.org/docs/charts/incubator/archiveteam-warrior)
For more information about this App, please check the docs on the TrueCharts [website](https://truecharts.org/charts/incubator/)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `archiveteam-warrior` deployment
```console
helm uninstall archiveteam-warrior
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install archiveteam-warrior \
--set env.TZ="America/New York" \
TrueCharts/archiveteam-warrior
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/manual/SCALE%20Apps/Important-MUST-READ).
description:"This Chart will download and install SteamCMD. It will also install ARK:SurvivalEvolved and run it (Normal server startup of ARK can take a long time!)."
This Chart will download and install SteamCMD. It will also install ARK:SurvivalEvolved and run it (Normal server startup of ARK can take a long time!).
## General Info
TrueCharts can be installed as both *normal* Helm Charts or as Apps on TrueNAS SCALE.
However only installations using the TrueNAS SCALE Apps system are supported.
This readme is just an automatically generated general guide on installing our Helm Charts and Apps.
For more information, please click here: [arksurvivalevolved](https://truecharts.org/docs/charts/incubator/arksurvivalevolved)
For more information about this App, please check the docs on the TrueCharts [website](https://truecharts.org/charts/incubator/)
**This chart is not maintained by the upstream project and any issues with the chart should be raised [here](https://github.com/truecharts/charts/issues/new/choose)**
**Upgrading, Rolling Back and Uninstalling the Chart**
To upgrade, rollback or delete this Chart from TrueNAS SCALE check our [Quick-Start Guide](https://truecharts.org/docs/manual/SCALE%20Apps/Upgrade-rollback-delete-an-App).
### Helm
To uninstall the `arksurvivalevolved` deployment
```console
helm uninstall arksurvivalevolved
```
## Configuration
### Helm
#### Available Settings
Read through the values.yaml file. It has several commented out suggested values.
Other values may be used from the [values.yaml](https://github.com/truecharts/library-charts/tree/main/charts/stable/common/values.yaml) from the [common library](https://github.com/truecharts/library-charts/tree/main/charts/common).
#### Configure using the command line
Specify each parameter using the `--set key=value[,key=value]` argument to `helm install`.
```console
helm install arksurvivalevolved \
--set env.TZ="America/New York" \
TrueCharts/arksurvivalevolved
```
#### Configure using a yaml file
Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart.
If you need to connect this Chart to other Charts on TrueNAS SCALE, please refer to our [Linking Charts Internally](https://truecharts.org/docs/manual/SCALE%20Apps/linking-apps) quick-start guide.
## Support
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/docs/manual/SCALE%20Apps/Important-MUST-READ).
- Please check our [quick-start guides for TrueNAS SCALE](https://truecharts.org/manual/SCALE%20Apps/Important-MUST-READ).
description:"Your Steam username goes here if you want to install a game that needs a valid account, otherwise leave it blank (ATTENTION You have to disable Steam Guard)."
- variable:username
label:Username
description:Optionally set a steam username otherwise (disable Steam Guard).
schema:
type:string
default:""
- variable:PASSWRD
label:"PASSWRD"
description:"Your Steam password goes here if you want to install a game that needs a valid account, otherwise leave it blank (ATTENTION You have to disable Steam Guard)."
- variable:password
label:Password
description:Optionally set a steam password (disable Steam Guard).
schema:
type:string
private:true
default:""
- variable:SRV_PWD
label:"SRV_PWD"
description:"Leave empty if you want to use the settings from GameUserSettings.ini (this field accepts no spaces)"
- variable:srv_password
label:Server Password
description:Optionally set a password for the server (this field accepts no spaces)
schema:
type:string
private:true
default:""
- variable:SRV_ADMIN_PWD
label:"SRV_ADMIN_PWD"
description:"Leave empty if you want to use the settings from GameUserSettings.ini (this field accepts no spaces)"
- variable:srv_admin_pass
label:Server Admin Password
description:Optionally set a password for the admin (this field accepts no spaces)
schema:
type:string
private:true
default:""
- variable:env
group:"App Configuration"
label:"Image Environment"
schema:
additional_attrs:true
type:dict
attrs:
- variable:GAME_ID
label:"GAME_ID"
description:"The GAME_ID that the container download at startup.(https://developer.valvesoftware.com/wiki/Dedicated_Servers_List)"
- variable:game_id
label:Game ID
description:"The SteamCMD Game ID."
schema:
type:string
required:true
default:"376030"
- variable:MAP
label:"MAP"
description:"Map name"
schema:
type:string
default:"TheIsland"
- variable:SERVER_NAME
label:"SERVER_NAME"
description:"Leave empty if you want to use the settings from GameUserSettings.ini (this field accepts no spaces)"
enum:
- value:"376030"
description:ARK Survival Evolved
- value:"445400"
description:ARK Survival of the Fittest
- variable:custom_map
label:Custom Map
description:Custom Map name.
schema:
type:string
default:""
- variable:VALIDATE
label:"VALIDATE"
description:"Set the Variable to true if you want to validate the installation otherwise leave it blank."
- variable:map
label:Map
description:Map Name
schema:
type:string
show_if:[["custom_map","=",""]]
default:TheIsland
enum:
- value:TheIsland
description:Island
- value:TheCenter
description:Center
- value:ScorchedEarth_P
description:Scorched Earth
- value:Ragnarok
description:Ragnarok
- value:Aberration_P
description:Aberration
- value:Extinction
description:Extinction
- value:Genesis
description:Genesis
- value:Valguero_P
description:Valguero
- value:CrystalIsles
description:Crystal Isles
- value:Gen2
description:Genesis 2
- value:Lost Island
description:LostIsland
- value:Fjordur
description:Fjordur
- value:custom
description:Custom
- variable:server_name
label:Server Name
description:Optionally set a name for the server (this field accepts no spaces)
schema:
type:string
default:""
- variable:validate
label:Validate
description:Enable to validate the installation, otherwise uncheck it.
schema:
type:boolean
default:true
- variable:GAME_PARAMS
label:"GAME_PARAMS"
description:"Enter your game parameters separated with ? and start with ? (don't put spaces in between eg: ?MaxPlayers=40?FastDecayUnsnappedCoreStructures=true)"
- variable:rcon_enabled
label:Enable RCON
schema:
type:string
default:"?RCONPort=27020?RCONEnabled=True"
- variable:GAME_PARAMS_EXTRA
label:"GAME_PARAMS_EXTRA"
description:"Values to start the server"
type:boolean
default:true
- variable:game_params
label:Game Parameters
description:Enter your game parameters starting with ?, one per entry
schema:
type:string
default:"-server -log -crossplay"
type:list
default:[]
items:
- variable:game_params_entry
label:Parameter Entry
description:Single parameter per entry. Start with ?
schema:
type:string
default:""
required:true
- variable:easy_game_extra_params
label:Game Extra Parameters (Easy)
description:Appends the game extra params to the Game Extra Parameters list
schema:
additional_attrs:true
type:dict
attrs:
- variable:server
label:Server Flag
description:Adds -server flag to Game Extra Parameters
schema:
type:boolean
default:true
- variable:log
label:Log Flag
description:Adds -log flag to Game Extra Parameters
schema:
type:boolean
default:true
- variable:crossplay
label:Crossplay Flag
description:Adds -crossplay flag to Game Extra Parameters
schema:
type:boolean
default:true
- variable:game_params_extra
label:Game Extra Parameters
description:"Enter your game extra parameters, one per entry"
schema:
type:list
default:[]
items:
- variable:game_params_extra_entry
label:Extra Parameter Entry
description:Single parameter per entry.
schema:
type:string
default:""
required:true
# Include{containerConfig}
# Include{serviceRoot}
- variable:main
label:"Main Service"
description:"The Primary service on which the healthcheck runs, often the webUI"
label:Main Service
description:The Primary service on which the healthcheck runs, often the webUI
schema:
additional_attrs:true
type:dict
@@ -97,21 +176,21 @@ questions:
# Include{serviceSelectorLoadBalancer}
# Include{serviceSelectorExtras}
- variable:main
label:"Main Service Port Configuration"
label:Main Service Port Configuration
schema:
additional_attrs:true
type:dict
attrs:
- variable:port
label:"Port"
description:"This port exposes the container port on the service"
label:Port
description:This port exposes the container port on the service
schema:
type:int
default:7777
required:true
- variable:udp2
label:"udp2 service"
description:"Container Port 7778"
label:udp2 service
description:This should always be (Main Port + 1)
schema:
additional_attrs:true
type:dict
@@ -119,21 +198,21 @@ questions:
# Include{serviceSelectorLoadBalancer}
# Include{serviceSelectorExtras}
- variable:udp2
label:"udp2 Service Port Configuration"
label:udp2 Service Port Configuration
schema:
additional_attrs:true
type:dict
attrs:
- variable:port
label:"Port"
description:"This port exposes the container port on the service"
label:Port
description:This port exposes the container port on the service
schema:
type:int
default:7778
required:true
- variable:udpsteam
label:"udpsteam service"
description:"Container Port 27015"
label:UDP Steam Service
description:Container Port 27015
schema:
additional_attrs:true
type:dict
@@ -141,21 +220,21 @@ questions:
# Include{serviceSelectorLoadBalancer}
# Include{serviceSelectorExtras}
- variable:udpsteam
label:"udpsteam Service Port Configuration"
label:UDP Steam Service Port Configuration
schema:
additional_attrs:true
type:dict
attrs:
- variable:port
label:"Port"
description:"This port exposes the container port on the service"
label:Port
description:This port exposes the container port on the service
schema:
type:int
default:27015
required:true
- variable:rcontcp
label:"rcontcp service"
description:"Container Port 27020"
label:rcontcp service
description:Container Port 27020
schema:
additional_attrs:true
type:dict
@@ -163,14 +242,14 @@ questions:
# Include{serviceSelectorLoadBalancer}
# Include{serviceSelectorExtras}
- variable:rcontcp
label:"rcontcp Service Port Configuration"
label:rcontcp Service Port Configuration
schema:
additional_attrs:true
type:dict
attrs:
- variable:port
label:"Port"
description:"This port exposes the container port on the service"
label:Port
description:This port exposes the container port on the service
{{/* Make sure all variables are set properly */}}
{{- include "tc.common.loader.init" . }}
{{- if ne (int .Values.service.udp2.ports.udp2.port) (add1 (int .Values.service.main.ports.main.port)) -}}
{{- fail (printf "In the service udp2, the port for udp2 must be greater by 1 than the main service's port. You have to set it to <%s>." (add1 .Values.service.main.ports.main.port)) }}
{{- end -}}
{{- if and (ge (int .Values.service.udpsteam.ports.udpsteam.port) 27020) (le (int .Values.service.udpsteam.ports.udpsteam.port) 27050) -}}
{{- fail "UDP Steam Service port cannot be between 27020 and 27050." -}}
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
